On Saturday 26 October 2013
Disclaimer
By
reading upto this part of this Blog you should understand that this
process may brick your device, if something goes wrong. So, you must
understand the risk and proceed by your own accord.
This Blog or the author will not be responsible for any damage
This Blog or the author will not be responsible for any damage
Instructions: Step I
1) You need to unlock the bootloader of your HTC Wildfire S. For doing it got to here.
You need to enable USB debugging on your phone. If you do not know how to do it then go to : Settings > Applications > Development and the check the box beside “Enable USB Debugging” to turn it on
You need to enable USB debugging on your phone. If you do not know how to do it then go to : Settings > Applications > Development and the check the box beside “Enable USB Debugging” to turn it on
Step II
1) Power your PC on.
2) Connect it to the internet connection.
3) Download the PG76IMG.zip file from here.
4) Now download this script from here.
5) Bring the USB cable in action to jack your handset with the PC.
6) Now transfer the downloaded PG76IMG zip file to the phone’s SD card.
7) After that disconnect the device from the PC.
8) Disable FastBoot.
9) Switch the phone off.
2) Connect it to the internet connection.
3) Download the PG76IMG.zip file from here.
4) Now download this script from here.
5) Bring the USB cable in action to jack your handset with the PC.
6) Now transfer the downloaded PG76IMG zip file to the phone’s SD card.
7) After that disconnect the device from the PC.
8) Disable FastBoot.
9) Switch the phone off.
Step III
1) Reboot the phone into the HBoot mode by pressing the VOL UP +DOWN + POWER keys combinations.
2) It will prompt “Apply Update”.
3) You cannot be able to use the touch screen here and so you need have to use Vol UP key to click. So, click on the prompt to start the update.
4) Now reboot the phone using the power button.
Delete the zip from the SD card
2) It will prompt “Apply Update”.
3) You cannot be able to use the touch screen here and so you need have to use Vol UP key to click. So, click on the prompt to start the update.
4) Now reboot the phone using the power button.
Delete the zip from the SD card
Step IV
1) PC to the SD card.
2) Disconnect it form the PC.
3) Reboot into HBoot mode again by following the above instructions (Step III: point 1)
4) Use the volume keys to navigate the HBoot menus.
5) Enter the recovery mode inside HBoot.
6) Now select “Install Zip from SD card”.
7) Select the root script zip file.
8) Now select confirm to start the download process. Wait for some time for the process to be completed.
9) After the complete root process the phone will be rebooted.
2) Disconnect it form the PC.
3) Reboot into HBoot mode again by following the above instructions (Step III: point 1)
4) Use the volume keys to navigate the HBoot menus.
5) Enter the recovery mode inside HBoot.
6) Now select “Install Zip from SD card”.
7) Select the root script zip file.
8) Now select confirm to start the download process. Wait for some time for the process to be completed.
9) After the complete root process the phone will be rebooted.
Posts
